Obihai OBi110, Administration Manual

Page: 81 / 202

Copyright 2010-2012 Obihai Technology, Inc. 81
FirmwareURL
- System Start = Check for f/w upgrade from
FirmwareURL just once on system start
- Periodically = Check for f/w upgrade from
FirmwareURL on system start, and then periodically
at the interval specified in the Interval paramter
Note: First f/w upgrade check on system start will be
performed after a random delay of 0-30s
Interval
When Method is set to Periodically, this is the number of
seconds between each checking of f/w upgrade check from
FirmwareURL. If value is 0, device checks once only on
system start (i.e., equivalent to setting Method to System
Start)
0
FirmwareURL
URL of firmware package. URL must include scheme.
Supported schemes are http:// and tftp://
Username Username for authentication, if needed, if scheme is http://
Password Password for authentication, if needed, if scheme is http://
Auto Provisioning
Method
Current operational method of Provisioning. Available
choices are:
- Disabled = Do not download from ConfigURL
- System Start = Download from ConfigURL just once
on system start
- Periodically = Download from ConfigURL on system
start, and then periodically at the interval specified
in the Interval paramter
Note: First download on system start will be performed after
a random delay of 30 – 90s. If there is a firmware update
scheduled at the beginning. Or a random delay of 10- 70s..
System Start
Interval
When Method is set to Periodically, this is the number of
seconds between download from ConfigURL. If value is 0,
device downloads once only on system start (i.e., equivalent
to setting Method to System Start)
0
ConfigURL URL of config file tftp://$DHCPOPT66/$MAC.xml
GPRM0 to GPRM7
Non-volatile generic parameters which can be referenced in
other parameters, such as ConfigURL