Obihai OBi110, Administration Manual

Page: 154 / 202

Copyright 2010-2012 Obihai Technology, Inc. 154
SIT Tone 3
ToneName Special Information Tone - 3
TonePattern Obihai Tone Pattern Script 914-16,1371-16,1777-
16;20;(1/.380+0,2/.380+0,4/.380+0,0/0+4)
SIT Tone 4
ToneName Special Information Tone - 4
TonePattern Obihai Tone Pattern Script 985-16,1371-16,1777-
16;20;(1/.380+0,2/.380+0,4/.380+0,0/0+4)
Outside Dial Tone
ToneName Outside Dial Tone
TonePattern Obihai Tone Pattern Script 385-16;10
R-Command Tone
ToneName R-Command Tone
TonePattern Obihai Tone Pattern Script 400-16;5
Paging Tone
ToneName Paging Tone
TonePattern Obihai Tone Pattern Script 480-16;1;(.2+.2)
Ring Profile A & B Features of the OBi Device
The general format of an OBi Ring Profile is as follows: [field-1];[field-2];...;[field - 5]
Use the ";" to separate up to five (5) configuration fields.
Please note that no spaces are allowed to be used in a tone profile pattern.
Field–1 Composition:
Field-1 describes the overall ringing duration in seconds.
The expression is a numeric value, and supports up to 3 decimated digits.
The numeric value can negative, zero, and positive:

Negative value: Ringing lasts indefinitely

No value: Ringing lasts infinitely

Zero value: Ringing is skipped

Positive value: Normal ringing duration
Example: 30.5
The above example illustrates a ringing tone that terminates after 30.5 seconds.
Field –2 to Field –5 Composition:
Field - 2/3/4/5 share the same definition, and each field describes one single cadence segment. Together, the four (4) fields
form a macro-segment, which will be repeated until ringing expires.
The expression is a string of numeric values with the special notation ' ( ' , ' ) ' and ' , '
It has the format as per the following construct: t(on_0+off_0,on_1+off_1,on_2+off_2,on_3+off_3)