Obihai OBi110, Administration Manual

Page: 26 / 202

Copyright 2010-2012 Obihai Technology, Inc. 26
6
Please Wait (while OBi is checking for
software update)…
This is followed by either:
- Software Update Available. Press 1
to update software, OR
- Software Update Not Available
If an update is available, press 1 to
proceed with the update. The software
update process will start as soon as
you hang up the phone.
Warning: Once the software upgrade
process starts, the device’s power LED
will blink rapidly. Please make sure the
power and network cable stay
connected to the unit until the process
is complete.
8 Restore Factory Default
Press 1 to confirm device restore to
factory default settings.
Press # to return to device
configuration menu.
Press # # to exit IVR.
9 Reboot OBi Device
Press 1 to confirm device reboot.
Press # to return to device
configuration menu.
Press # # or hang up to exit IVR.
0
Additional Options
Access other configuration options of
the OBi device.
Enter option followed by the # key.
Note for OBi202 and OBi302: Options 1 – 4 apply to the WAN (Ethernet) interface only. These options will appy to OBiWiFi
instead if the WAN (Ethernet) interface is not connected and the OBiWiFi Wireless Adapter is connected to a Wi-Fi access
point. To access similar options that apply specifically to OBiWiFi, we recommend use of options 41 – 44 instead to avoid
ambiguity.
System Level Configuration Options
Additional Configuration Options Available with the OBi IVR after Pressing * * * 0 :
Selection
(Always Press “#” After Entering
Selection)
Announcement What Can You Do?
1
Firmware Version
The current value of the firmware
version will be read back.
Press 0 to repeat the information.
Press # to enter another configuration
selection.
2 IVR Password Press 1 to enter a new value.