Obihai OBi110, Administration Manual

Page: 107 / 202

Copyright 2010-2012 Obihai Technology, Inc. 107
OBiTALK Service Settings
OBiTALK Service Settings Parameter Guide:
Parameter Description Default Setting
Enable
Enable the OBiTALK Service (the built-in free voice
service that comes with every OBi Device)
Yes
LocalPort The UDP or TCP port used by device to send and listens
for OBiTALK messages 10000
DisplayName Display name to identify the subscriber, for the purpose
of displaying a Caller ID Name on the recipient’s device
DigitMap Digit map to restrict numbers that can be dialed or
called with this service. See
OBi Call Routing and Digit
Map Section for a description of the syntaxes for
specifying a Digit Map.
(<ob>xxxxxxxxx|obxxxxxxxxx)
InboundCallRoute Routing rule for directing incoming calls on this service.
The default rule is to send all incoming calls to the
PHONE port (ph). See
OBi Call Routing and Digit Map
Section for a description of the syntaxes for specifying
this parameter
ph
RingProfile Select a Ring Profile to ring the PHONE port with when
an incoming call is routed to the PHONE port. Choices
are A, or B A
CodecProfile Select a Codec Profile to be used for all calls on this
service. Choices are A, or B. A
DefaultRing Default ring pattern number to ring the PHONE port for
incoming calls on this trunk that are routed to the 2