Obihai OBi110, Administration Manual

Page: 20 / 202

Copyright 2010-2012 Obihai Technology, Inc. 20
Nordic Style Feature Invocation
In the above description of call waiting, 3-way calling, and call transfer operations, the way the features are invoked is
referred to as N. America style. In Nordic regions (such as Sweden, Norway), the same features are invoked by hook flashing
followed by a digit 0, 1, 2, 3, or 4 to more precisely control which operations to apply to the calls. For these regions, the
phones may also be equipped with an R button for hook flashing. The commands issued to the OBi are referred to as R0, R1,
R2, R3, R4, and R5. Here is a summary of the operations:
Commands Operations Scenarios
R0 Reject the 2
nd
incoming call 1
st
call connected, 2
nd
call ringing
R1 End the 1
st
call. Resume or answer the 2
nd
call 1
st
call connected, 2
nd
call on
hold or ringing
R2 Hold 1
st
call. Resume or answer the 2
nd
call (swap
calls)
1
st
call connected, 2
nd
call on
hold or ringing
R3 Keep the 1
st
call. Resume or answer the 2
nd
call
(conference)
1
st
call connected, 2
nd
call on
hold or ringing
R4 Transfer 2
nd
call peer to the 1
st
call peer 1
st
call connected, 2
nd
call on
hold or connected
To select the Nordic style of feature invocation, set the parameter PHONE Port::CallCommandSignalMethod to “Nordic
Regions (R1, R2, …)”. The default is: N. America.
Caller ID Block (Anonymous Calling)
Caller ID Block allows you to mask your name and number information from appearing on the phone you are calling. To use
Caller ID Block for one call only, dial *67 and then the destination number. To use Caller ID Block on a persistent basis, dial
*81 from the handset attached to the OBi. All calls will use the Caller ID Block feature until you cancel the Caller ID Block.
To cancel Caller ID Block, dial *82 from the handset attached to the OBi.
Automatic Call Back (Call Return)
Automatic Call Back, also called Call Return can be used to call back the last caller who called you without actually dialing
their number. To use Automatic Call Back, from the phone attached to the OBi, dial *69. The OBi will then attempt to use
the previous callers Caller ID information to make the call.
Repeat Dialing
Repeat Dialing is useful when you call a number that is busy and you want to keep trying so that your call gets through
when the far end is available. Repeat dialing will continue to try the last number until the OBi device can complete the call
or Repeat dialing is cancelled. To enable repeat dialing, from the phone attached to the OBi, dial *05 and hang up. To
cancel repeat dialing, from the phone attached to the OBi, dial *06.
Anonymous Call Block
Anonymous Call Block allows you to block calls from incoming callers when there is no identifying caller ID name or number.
Incoming calls will be presented with a busy signal. To use Anonymous Call Block, from the phone attached to the OBi, dial
*77. To cancel Anonymous Call Block, from the phone attached to the OBi, dial *87.
Do Not Disturb
Do Not Disturb (DND) allows you to set the phone to immediately forward calls made to your OBi to the number set-up as
your voicemail number / account. If no voicemail account is set-up, the OBi will return a busy signal to the caller until you
turn off DND. To turn on DND, from a phone attached to the OBi, dial *78. To turn off DND, from a phone attached to your
OBi, dial *79.