1 0
Freq Fr/Lf1
DC02
1 2
0
96
07 DC1 LEV
- Default setting = ON. You may want to use
LEVER1 and LEVER2 for Pitch Bend and Vibrato as you play the
patch, so we will keep this setting.
08 DC1
KEY - Default setting = KEYBD. We want the Keyboard
to control DC01 as normal, so keep this setting.
09 DCO 1 CLIK
- Default setting = OFF. Key Click is not usually
associated with a String sound; leave this Parameter OFF.
STEP 3:
Set up DC02 as follows:
Detu ne
Pw PW/Lf2 Wave Wsel Leve rs Keybd Click
-55
0
BOTH BOTH KYB D OFF
1 O DCO 2
FREQ - We'll program DC02 to have a unison pitch
with DC01 . VALUE =
1 2.
1 1 DC2
I
LF1
-
Default setting =
0.
We'll leave this setting alone
in order to keep the pitch of DC02 stable. DC01 being modulated
slightly by LF01 produces a warm, moving detuning effect relative
to DC01 .
1 2 DCO 2
DETU - Using a slight amount of DETUNE enhances
the detuning effect of the DC01 "0 1 FREQ MOD BY LFO 1 ".
VALUE = +8.
1 3 DCO 2 PW
- The Pulse Width of DC02 will be modulated by
LF02 in the next Parameter. For our purposes in this patch, we
want to use a Square wave. Set VALU E to
31 .
1 4 DC2PW
I
LF2
- We want a wide Pulse Width modulation on
the Square wave we set up in the previous Parameter. Using a
negative number inverts the LFO's effect relative to LF01 (which is
modulating DC01 FREQ.) for an enhanced modulation. Set
VALUE to
-55.
1 5 DC02 SHAPE
- We will again use a Sawtooth wave for this
oscillator and use the same setting as for DC01 . Value =
0.
1 6 DC02 (Wave Select)
- For added harmonic richness, we
will use a combination Pulse and Sawtooth waves for DC02. The
Pulse Width modulation that we are using in Parameter 1 4 creates
a u nique harmonic motion as the Pulse Width changes relative to
the Sawtooth, which is stable. VALUE = BOTH.
1 7 DC2 LEV
- Since we are using Pitch Bend and Vibrato on
DC01 , we want to keep the default setting for DC02 as well.
VALUE = BOTH.
M atrix-GR Owner's Manual