In this example, changing to Patch Number
23
on the Master
controller causes the MATRIX-GR to recall Patch
35.
Re-enter
"1 G P MAP EDIT" and set up a few more Patch Maps. Try these:
DO
01
02
03
04
IN : 44
IN : 3 1
IN : 65
IN = 19
IN : BB
O U T = 15
O U T = 76
O UT : 20
O UT : 09
O UT : 52
With this set-up, selecting Patch
00
on the Master, selects Patch
44
on the MATRIX-GR. Patch
01
on the M aster selects Patch
31
on the MATRIX-GR. Patch
02
on the Master selects Patch
65
on
the MATRIX-GR. Master
03
recalls
1 9
and Master
04
recalls
88.
Just remember you have no less than 1 00 of these Maps to
program in any ·.vay you need.
Patch Map Operation #2
In the hypothetical situations above, you can transmit selective
Patch Changes from the MATRIX-GR to the second slave
according �o the
OUT
Patch Numbers. Referring to our first
example, if you select Patch
23
on the MATRIX-GR's front panel,
Patch
1 7
is selected on the second slave. Selecting a Patch
Number on the MATRIX-GR's front panel is referred to as selecting
the patch
locally.
In the sample Table above, Local Patch
00
selects Patch
15
on
the second slave. Local
01
selects Patch
76
on the slave. Local
02
selects
20
on the slave,
03
selects
09
and
04
selects
52.
1 7 P MAP ECHO · "Patch Map Echo"
In many situations, you may find
It
convenient (even necessary) to
have selective Patch Changes occur on both the MATRIX-GR
and
the second slave simultaneously from the Master controller. This is
where Patch Map Echo comes in.
Patch Map Operation #3
When P MAP ECHO is ON, selecting a Patch Number on the
Master controller (the Reference Patch) causes the MATRIX-GR to
recall the
IN
Patch and send the the
OUT
Patch to the second
slave at the same time. This permits the M aster controller to set up
the other two slaves in the system, the MATRIX-GR and the
second slave, with one MIDI Patch Change command. Pretty
convenient, eh?
When "1 7 P MAP ECHO" is OFF, selecting a Patch Number on the
Master controller (the Reference Patch) causes the MATRIX-GR to
recall the
IN
Patch only and the second slave instrument's Patch
Number does not change. In this case, changing patches on the
second slave is accomplished by selecting a new Patch Number
from the MATRIX-GR's front panel (or the slave's own front panel,
of course).
Matrix-GR Owner's Manual
73
