90
O n l y n o t e s w i t h i n t h e
Z O N E
w i l l p l a y
STEP 3 : SET U P THE TRANSPOSITIONS
While you are still in SPLIT EDIT, you are able to transpose either or both
LOWER and UPPER keyboard parts to be in a different key signature.
1
L EFT TRANSPOSE
4 RIGHT TRANSPOSE
These two Parameters operate the same. VALU E range is from -3S
to
+24
where a setting of
O
indicates no transpose - the patch on
that part of the Master controller's keyboard will play in its normal
key. Each number represents a change of
1
semitone so you can
see that the range gives you the ability to transpose up
2
octaves
or down
3
octaves:
+24
+1 2
+7
+5
0
-5
-7
-1 2
-24
-36
STEP 4: SET THE MIDI OUTPUTS
UP 2 Octaves
U P
1
Octave
U P Perf. 5th
U P Pert. 4th
No Transpose
DOWN Perf. 4th
DOWN Perf. 5th
DOWN 1 Octave
DOWN 2 Octaves
DOWN 3 Octaves
You are able to determine
if
the SPLIT will allow the two keyboard sections
to transmit and receive M I DI information. Either of the LOWER or UPPER,
both or neither can be set to transmit and receive MIDI. Please remember,
however, that since the MATRIX-SR must be controlled by a Master
controller, you must make sure that
2
LEFT M I DI OUTPUT and5 RIGHT MIDI
OUTPUT are turned ON for all SPLITS. Otherwise, the MATRIX-SR will not
play because it has been set not to recognize M I DI in SPLIT Mode.
Also, if your Master controller does not have its own Split capability make
sure MASTER EDIT Parameter 01 OMNI MODE is turned ON. This will
ensure that both the Lower and Upper parts of the SPLIT will play in the
M ATRIX-SR.
2 LEFT MIDI OUTPUT
The ability for the MATRIX-SR's LOWER Voices to transmit and
receive M I D I is turned ON or OFF in this Parameter.
M atrix-SR Owner's Manual
