1 04
2
RVEL -55
E2REL
Negative (inverted) R ELEASE VELOCITY is used to modulate the
RELEASE time of ENV2 that is controlling the VCA. You can
control how fast the sound will die out depending upon how
quickly keys are let go. The sound will end abruptly with fast key
release and fade out much slower with a slow key release. We set
the maximum RELEASE time in Parameter 64.
3 TRAK +63 VCFFQ
We defeated the Keyboard control of the VCF in Parameter 26 in
order to select TRACK as the modulation source here. In
Parameter 33, we selected
KEYB
as the IN PUT controller and
defined Its control curve with Parameters 34 through 38. In setting
up this MATRIX MOD, use an AMOUNT value of
+63.
We want
TRACK to add to the VCF FREQUENCY as you play notes up and
down the Master's keyboard. Try using lower AMOUNTs and hear
how the brightness of the patch diminishes. Inverting the
AMOUNT lowers the Filter content until no sound is heard.
STEP13: NAME IT -
Enter the PATCH SELECT Page of the PATCHES
Mode. Select NAME and call it anything you want. We call It
"STRINGS1 "
but if you have a better name, it's OK by us.
STEP 1 4: STORE IT
· If you would like to keep this patch, stay in the
PATCH SELECT Page but select NUMBER. Press and hold the
STORE button and type in the two-digit Patch Number of your
choice. To prevent unwanted editing of your new patch, you may
want to enable the Individual Patch PROTECT while you're at It.
M atrix-SR Owner's Manual
