1 . When this mode is entered, the display will read
"21 CHECK
CASS ".
2.
Rewind the tape to the point where the data's leader tone just
begins. This is where a tape counter on your recorder comes in
handy, especially
if
you have several banks of data in a row.
3. Press the VALUE button on the MATRIX-GR. The display will read
"READY? ".
4.
Press PLAY on your cassette recorder.
5. Press the YES button on the MATRIX-GR. The VALUE button LED
will go out and the leader tone will be heard followed by the data
chatter. Again,
if
your recorder does not have a monitor, no sound
will be heard.
G. During this time, the display will show the message
" CHECKING
DA TA
" and the VALUE button LED will slowly flash on and off to
verify that the CHECK ALL function is in process.
7. When the CHECK ALL process is completed, one of two things
will happen. If the tape is verified, the display will return to the
"21
CHECK CASS "
message. If the tape is found to have one or
more things wrong with it, you will get an "Error Message" on the
display. Error Messages are described later in this section.
22 LOAD ALL
This parameter loads the MATRIX-GR's memory with the data on the
tape. Please bear in mind that
the LOAD ALL function will
erase all of the memory in the synthesizer and replace it
with the data coming from the tape.
The procedure for LOAD ALL is almost identical to that for CHECK
ALL. The only extra step is to make sure that M EMORY PROTECT on
the back panel is turned OFF. If it is left ON, LOAD ALL cannot take
place. However, any patches with individual patch PROTECT turned
on will be erased and replaced as front panel PROTECT is ignored
during LOAD ALL.
When this Parameter is entered, the display will read
"22 LOAD
CASS".
Follow the procedure above for CHECK ALL to re-load the
MATRIX-GR from tape. The display will show the message
"L OADING
DA TA "
while the transfer is taking place. If the data transfer is
successful, the display will return to the
"22 L OA D CASS "
message. If the tape has anything wrong with �. you will get an "Error
Message" on the display. Error Messages are described later in this
section.
Matrix-SR Owner's Manual
79
