80
23 SELECTIVE LOAD
This Parameter allows you to take a single Patch or a single Split from
the tape and load it individually into the MATRIX-SR. This feature
permits the loading of individual patches from several tapes in order to
compile them into one bank of memory.
1 . Turn off M EMORY PROTECT on the back panel.
2.
When this parameter is entered, the display will read
"23 L OAD
ONE ".
3. Rewind the tape to the point where the data's leader tone just
begins. In this process, we will play the entire bank of data from the
tape. The MATRIX-SR, being set up to load in just a single patch,
will pick the selected patch only and ignore the rest of the data on
the tape.
4. Press the VALUE button. The display will read
" L OAD FROM
DO
"
. Here is where we select the Number of the patch on the
tape that we want to load in. As always, the
0-9
buttons,
< >
or
<< »
buttons on the Keypad are used to select this patch
Number.
5. Press the VALU E button again. The display will change to read
"INTO PA TCH
DD ".
Here is where we select the Number of the
patch where we want the one coming from tape to be stored in the
MATRIX-SR. Remember that the patch that is currently stored in
this memory location will be erased and replaced with the patch
coming in from tape. Also, if PROTECT has been turned on for this
patch, you must turn � off or S ELECTIVE LOAD cannot occur.
S. Press the VALU E button a third time. The display will now read
"READY? ".
7. Press the PLAY button on your cassette machine.
8. Immediately press the YES button on the MATRIX-SR. The LED on
the VALU E button will go out and the leader tone from the tape will
be heard followed by the data chatter. During this time, the display
will show the message
"L OADING DA TA "
and the VALUE
button LED will slowly flash on and off.
9. As soon as the MATRIX-SR identifies the patch on the tape, it will
store it into the selected patch Number in the MATRIX-SR and
immediately exit the transfer mode. The display will return to the
"23 L OAD ONE "
message if the transfer was successful. If not,
an Error Message will be displayed.
M atrix-SR Owner's Manual