Oak Telecom VoxBox, User Manual

Page: 33 / 165

DTMF Programming
Table 4-1: PBX Parameter Commands
Operation Command Default
Extension size
*300 + X
where X is a digit 1-4
You can only change this parameter if mailboxes
and/or legal extensions have not yet been
defined.
3
Cut off time for
continuous call
progress tone
detection
*301 + X
where:
X = cut off time in seconds (0-9)
6 seconds
No. of rings before
the line is answered *310 + line number of rings
Line number = 1-4
Number of rings = 1-9
1
Time to wait for
No-Answer *311 + XX
where XX is 00-99 seconds.
This code is applicable only when supervised
transfer is selected.
20 seconds
Legal PBX
Extensions *320 + Y + First Ext. + Last Ext. + #
where Y is a group number (0-9).
Example:
*320 0 330 350 #
*320 1 355 375 #
You can define up to 10 groups of legal
extensions. If a caller dials an extension by direct
dialing (code 170), The unit checks if the
extension is legal. If the extension is not legal,
The unit does not transfer the call.
None
Resetting a group *320 + Y + 000 + 000 + # (the two groups of
zeros can be 2, 3, or 4 digits long, according to
the extension size)
Resetting all groups *320 + #
Operator ID Code *330 + X
where X is a digit 0-9
When the caller dials this digit during any script
message, the call is transferred to the operator.
0
Programmable code
for retrieving
messages *331 + X
X = 0-9; Retrieve digit
9
Voice Mail and Auto Attendant System Installation and Programming Manual 4-3