Oak Telecom VoxBox, User Manual

Page: 99 / 165

VMS Programming
NOTE
After transferring a call in non-supervised mode using in band DTMF integration, the Busy,
No Answer and Do not Disturb menu is played with the language defined here.
Do Not Disturb – When this is enabled, the Voice Mail will not transfer any calls from the
Auto-Attendant to this extension. The Do Not Disturb menu will be played instead.
Time Stamp – This is the option for the Voice Mail to play or not to play the time and date
of the message.
Command: *531
Local Notification – Notification can be performed as local or external. The possible types
of local notification are as follows:
Message Light 1 – The Voice Mail sends the code that is defined in Notification codes to
turn on the light on the telephone or to change the dial tone of the extension.
Message Light 2 – This is the same as message light 1. This option is used with certain
PBXs that support more than 1 type of terminal.
Sign Ring – The unit rings the extension number periodically as defined by the “ring
notification interval”, until all new messages have been heard or the maximum number of
notification retries is reached.
Rings – The Voice Mail rings the extension number for a period of time, as defined in the
“ring notification duration” and the “ring notification retries”. After the call is answered the
unit prompts a menu that allows the user to retrieve messages.
Command: *700
External Notification – The system administrator allows remote telephone and pager
notifications for each mailbox. Using the menu the owner can enable the remote notification
status and enter a desired external telephone or pager number. If remote notification is
allowed and enabled and a message is recorded, the Voice Mail dials the remote telephone
number to notify the mailbox owner of new messages. After the mailbox owner enters the
correct password, the unit plays the recorded message. When a remote pager is used the
Voice Mail dials the number to notify the mailbox owner to call back and to check his/her
mailbox. (No recorded message is played)
The Voice Mail stops sending ring notification after the mailbox owner has retrieved all
messages or the defined number of notification retries has been exceeded.
Command: *710, *711
Voice Mail and Auto Attendant System Installation and Programming Manual 6-35