Oak Telecom VoxBox, User Manual

Page: 50 / 165

DTMF Programming
4.4.6.8 Dialing a Programmed DTMF String from the Auto-
Attendant Script
Dialing a programmed DTMF string from the Auto-Attendant script.
Command: *121 + XX + B +YY+ #
Y = The DTMF string number (00-19)
See also command *381
4.4.6.9 Transferring the Call to the Operator at the End of the
Script Message
Transferring the call to the operator at the end of the script message: The unit
transfers the call in supervised, semi-supervised or non-supervised mode
depending on code *350.
Command: *125 + XX + #
Example: *125 00 #
The unit transfers the call to the operator at the end of script message 00.
4.4.6.10 Transferring the Call to a Mailbox
Transferring the caller to a specific mailbox number: The mailbox must be
defined and existing.
Command: *130 + XX + B + Mailbox #
Example: *130 01 5 152 #
Transfers the call to mailbox 152 when “5” is dialed during playback of script
message 01.
4.4.6.11 Disconnecting the Line
Disconnects the call at the end of the script message or if the caller dialed the
disconnect digit during playback.
This command may include the system message 001.
Command: *140 + XX + B + Z + #
Z = 0; means disconnect the line with no message.
Z = 1; means disconnect the line with the above system
message
Example: *140 10 * 1 #
The unit plays the disconnection message and then disconnects the call at the end
of script message 10.
Voice Mail and Auto Attendant System Installation and Programming Manual 4-20