Oak Telecom VoxBox, User Manual

Page: 42 / 165

DTMF Programming
Table 4-4: Mailbox Creation Commands
Operation Command
Creating a range of mailboxes *500 + First M Last M #
Creating one mailbox *501 + Mailbox #
Selecting an announcer mailbox *502 + XXXX + Y + #
where:
XXXX = existing mailbox number
Y = 0; Regular mailbox (default)
Y = 1; Announcer mailbox
Deleting a mailbox *510 + Mailbox #
Make sure to remove any transfer to the mailbox
from the Automated Attendant scripts before
deleting the mailbox.
Creating a range of virtual
mailboxes *520 + First M Last M #
Creating one virtual mailbox *521 + Mailbox #
Defining whether to play or skip
the time and date stamp during
message playback for a range of
mailboxes *530 + First M Last M B + #
where
B = 0; Play the date and time stamp (default)
B = 1; Skip the date and time stamp
Defining whether to play or skip
the time and date stamp during
message playback for one mailbox *531 + Mailbox B + #
where
B = 0; Play the date and time stamp (default)
B = 1; Skip the date and time stamp
Defining a language for a range of
mailboxes *532 + First M Last M Z + #
where
Z = 1, 2 or 3 (language number)
Defining a language for a mailbox *533 + Mailbox Z + #
where
Z = 1, 2 or 3 (language number)
4.4.2 Creating Mailbox Groups
You can create up to four mailbox groups for distributing messages. Each
mailbox group can contain up to twenty mailboxes. The group numbers are by
default 000, 001, 002 and 003. Group 099 consists of all mailboxes (real and
virtual).
You can select a different number for the first digit of the mailbox groups using
code *545. Make sure that you select a number that does not interfere with your
PBX’s numbering plan.
Voice Mail and Auto Attendant System Installation and Programming Manual 4-12