Oak Telecom VoxBox, User Manual

Page: 46 / 165

DTMF Programming
OPERATION COMMAND
Number of Ring Notification
retries *750 + XX
where XX refers to the number of ring notification
attempts.
Default is 05.
Activate the LED notification *760 + X
where
X = 0; for 1
st
new message (Default)
X = 1; for every new message.
4.4.4 Programming the Automated Attendant Script Menu
The unit supports up to 21 script messages (00-20) for building the Automated
Attendant menu. The unit also supports another six script messages in three
languages (21-26 for the first language, 31-36 for the second and 41-46 for the
third) for Busy menu, No Answer menu, Do Not Disturb menu and Post
Recording menu.
The opening scripts for each line are selected by command *112.
The following numbers are dedicated by default to specific script messages:
Script message number 00 to the Day Mode Opening Menu
Script message number 10 to the Night Mode Opening Menu
Script message number 15 to the Break Time Opening Menu
Script message number 20 to the Holiday Mode Opening Menu.
The rest of the script messages (01-09, 11-14 and 16-19) may be used in all
modes without limitations. Each script message has three parts:
Script message number
Recorded announcement
Programming that indicates the action to be taken when a caller dials one digit
(0-9) or dials nothing during an announcement.
4.4.5 Recording Script Messages
Table 4-7 describes how to record script messages.
Table 4-7: Recording Script Messages Commands
OPERATION COMMAND
Recording a script message *100 + XX + Beep + #
Playback a script message *101 + XX
Deleting a script message *102 + XX
Voice Mail and Auto Attendant System Installation and Programming Manual 4-16