Oak Telecom VoxBox, User Manual

Page: 47 / 165

DTMF Programming
NOTE
XX is script message 00-26, 31-36 and 41-46 .
4.4.6 Programming Script Messages
You can program each script message separately. The programming command
format for script messages is:
* + Command Code + XX + B + YY + #
Where:
Command Code defines the action that should be taken when B is pressed
during playback of script message XX.
XX = a script message number.
B = the digit dialed by the caller during playback of script message XX or at the
end of the message. B can be 0-9 or * (for end of message).
YY = the destination, which can be an extension, mailbox or another script
message.
NOTE
Do not define the Operator ID digit on script messages.
The command codes used to build the Automated Attendant Script Menu are
presented on the following pages. You can program one of the following actions
for each script message:
Play another script message
Return to the opening menu
Play another script message and change the language
Transfer the call to an extension
Transfer the call to the operator
Transfer the call to a mailbox
Disconnect the line
Leave a message in a mailbox
Retrieve messages from a mailbox
Direct dial to an extension
Transfer a call directly to a mailbox
Dial a free DTMF string
Place a call on hold
Blind Transfer to the busy extension
Play the directory listing
Voice Mail and Auto Attendant System Installation and Programming Manual 4-17