Oak Telecom VoxBox, User Manual

Page: 129 / 165

Programming Commands
In-Band DTMF Programming Commands
Operation Command
Define Transfer Supervision Type *220 + X
X = 0; Use Call Progress Tones
X = 1, Use DTMF codes
Define the DTMF code for the Answer, Busy
and DND conditions *221 + X + Code
1
+ #
X = 1; Answer condition
X = 2; Busy condition
X = 3; Do Not Disturb condition
Code
1
= DTMF code sent by the PBX for
the Transfer Supervision operation
Delete the DTMF code for a specific
condition *221 + X + #
X = 1; Answer condition
X = 2; Busy condition
X = 3; Do Not Disturb condition
Delete the DTMF code for all conditions *221 + #
PBX Parameters
Operation Command
No. of digits in extension *300 + X
Cut off time for continuous call progress tone
detection
*301 + X
X = cut off time in seconds (0-9)
Default: 6 sec.
No. of rings before the line is answered
*310 + line number of rings
Time to wait for No Answer *311 + XX
PBX legal extensions *320 + Y + First Ext. + Last Ext. + #
Y = group number (0-9)
Delete all PBX legal extensions *320 + #
Operator ID code *330 + X
X = 0-9
Key To retrieve messages during mailbox
greeting play back *331 + X
X = 0-9; Retrieve digit
Disconnect code *333 + Code
1
+ #
Delete disconnect code *333 + #
Voice Mail and Auto Attendant System Installation and Programming Manual 10-5