Oak Telecom VoxBox User Manual Download

Page: 83 / 165

VMS

Programming

6.4.1.4. CP Tone & Disconnect

Figure 6-28: PBX Parameters Window – CP Tone & Disconnect Tab

Busy Tone –

The “Busy on-time” and the “Busy off-time” determine the busy tone

cadence. Busy tone is used for: a.) Detecting a busy extension when transferring a call in
semi or supervised transfer mode and b.) Disconnecting the line when detecting a
disconnect situation.

Command: *371

Disconnect Code –

This defines the DTMF code sent from the PBX to the Voice Mail that

instructs the Voice Mail to disconnect the line.

Command: *333

NOTE

This code is sent only to VM extensions.

Disconnect Tone –

The disconnect on-time and off-time define the disconnect tone

cadence. The disconnect tone usually appears when the caller hangs up. The Voice Mail
will disconnect the line upon detecting this tone.

Command: *371

Voice Mail and Auto Attendant System Installation and Programming Manual

6-19

Summary of Contents for VoxBox






































































































































































Search results

Summary of Contents for VoxBox

Reviews:

Related manuals for VoxBox

Brands by name

Popular brands

Oak Telecom VoxBox, User Manual

Search results

Summary of Contents for VoxBox

Reviews:

Related manuals for VoxBox

Brands by name

Popular brands