Oak Telecom VoxBox User Manual Download

Page: 85 / 165

VMS

Programming

Directory Listing –

This is the “Dial By Name” feature for the caller in order to locate a

mailbox owner from the Auto Attendant using first names or last names can do this.

Command: *011

6.4.3. In-Band

DTMF

Protocol

Figure 6-30: In-Band DTMF Protocol Window

The In-Band DTMF Protocol function in the Parameters menu provides four
screens in which the PBX integration codes are defined.

Code Received from PBX –

In this column we define the DTMF string that is sent from

the PBX to the Voice Mail, (only if the PBX is In-Band DTMF protocol supported and
Voice Mail extension is defined as a VM extension). There is an option to have up to 40
strings and for each string the operation should be defined.

Command: *200,201,202

Max.

Time to Wait for DTMF –

The maximum amount of time the Voice Mail must wait

until is receives its first DTMF from the PBX.

Command: *210

Max.

Delay Between DTMFs –

The maximum amount of time is defined between each

DTMF in the string sent by the PBX to the Voice Mail.

Command: *211

Voice Mail and Auto Attendant System Installation and Programming Manual

6-21

Summary of Contents for VoxBox






































































































































































Search results

Summary of Contents for VoxBox

Reviews:

Related manuals for VoxBox

Brands by name

Popular brands

Oak Telecom VoxBox, User Manual

Search results

Summary of Contents for VoxBox

Reviews:

Related manuals for VoxBox

Brands by name

Popular brands