Oak Telecom VoxBox, User Manual

Page: 45 / 165

DTMF Programming
4.4.3.3 Setting Notification for Mailboxes
NOTE
Do not forget to enter programming mode by dialing *900 and the administrator’s
password before using the programming commands.
Virtual mailboxes do not have extensions and may not be configured for internal
notification.
Table 4-6: Program Notification for Mailboxes Commands
OPERATION COMMAND
Setting local notification for a
range of mailboxes *700 + First M Last M X + #
where
X = 0; notification is disabled
X = 1; Message Light On 1 is selected
X = 2; Message Light On 2 is selected
X = 3; Sign Rings is selected
X = 4; Rings is selected
Disable local notification for all
mailboxes *700 + #
Setting local notification for one
mailbox *701 + M X + #
where X is defined as above
Permitting remote notification for a
range of mailboxes *710 + First M Last M Y + #
where
Y = 0; remote notification is not permitted
Y =1; remote notification is permitted
Disable remote notification for all
mailboxes *710 + #
Permitting remote notification for
one mailbox
*711 + M Y + #
Y = 0; remote notification is not permitted
Y = 1; remote notification is permitted
Ring Notification Interval *720 + XX
where XX is a 2 digit number in minutes (1-99).
Default = 30 minutes
Ring Notification Duration *730 + X
where
X = 0; stands for short time for rings (default)
X = 1; stands for long time for rings
Maximum number of days to store
messages *740 + XX
where XX stands for number of days (00-99).
00 = Messages are not deleted by Voice Mail.
Time to wait after off-hook for
notification dialing *741 + X
X = Time in seconds (0-9)
Voice Mail and Auto Attendant System Installation and Programming Manual 4-15