Oak Telecom VoxBox User Manual Download

Page: 28 / 165

Installation

Figure 3-1: Analog Line Connections

4. On the side panel of the unit, plug the 9 VDC adapter jack into the

power supply connector.

5. Plug the 9 VDC adapter into the main power supply outlet to turn the

unit on. The LEDs on the front panel turn on and off, one after another
and then the LED indicating the status of the unit turns on.

6. If your PBX supports a full-authorized RS-232 integration with the unit,

connect one end of the RS-232 cable to the unit’s RS-232 connector and
the other end to the RS-232 connector of the PBX.

7. Call each unit line from any extension and verify the answer. You

should hear the default greeting (system message no. 000. See Chapter
12).

8. Replace the side panel cover.

9. Program the unit according to your PBX type and required applications.

Voice Mail and Auto Attendant System Installation and Programming Manual

3-2

Summary of Contents for VoxBox






































































































































































Search results

Summary of Contents for VoxBox

Reviews:

Related manuals for VoxBox

Brands by name

Popular brands

Oak Telecom VoxBox, User Manual

Search results

Summary of Contents for VoxBox

Reviews:

Related manuals for VoxBox

Brands by name

Popular brands