NVR SYSTEMS NVR-52 Series User Manual Download Page 91

Page: 91 / 192

Figure 6. 19 Result of System Log Search

Playback interface.

The toolbar in the bottom part of Playback interface can be used to control playing process.

Figure 6. 20 Interface of Playback by Log

6.1.6 Playing Back External File

Purpose:

Perform the following steps to look up and play back files in the external devices.

Steps:

Enter Tag Search interface.

Menu>Playback

Select the

External File

in the drop-down list on the top-left side.

The files are listed in the right-side list.

You can click the

button to refresh the file list.

Select and click the

button to play back it.

Summary of Contents for NVR-52 Series

































































































































































































Search results

Summary of Contents for NVR-52 Series

Reviews:

Related manuals for NVR-52 Series

Brands by name

Popular brands

NVR SYSTEMS NVR-52 Series, User Manual

Search results

Summary of Contents for NVR-52 Series

Reviews:

Related manuals for NVR-52 Series

Brands by name

Popular brands