NVR SYSTEMS NVR-52 Series User Manual Download Page 98

Page: 98 / 192

7.1 Backing up Record Files

7.1.1 Quick Export

Purpose:

Export record files to backup device(s) quickly.

Steps:

Enter Video Export interface.

Menu>Export>Normal

Choose the channel(s) you want to back up and click

button.

Note:

The time duration of record files on a specified channel cannot exceed one day. Otherwise, the

message box Max. 24 hours are allowed for quick export. will pop up.

Figure 7. 1 Quick Export Interface

Click on the

button to start exporting.

Note:

Here we use USB Flash Drive and please refer to the next section Normal Backup for more backup

devices supported by the device.

Figure 7. 2 Quick Export using USB1-1

Stay in the Exporting interface until all record files are exported.

Summary of Contents for NVR-52 Series

































































































































































































Search results

Summary of Contents for NVR-52 Series

Reviews:

Related manuals for NVR-52 Series

Brands by name

Popular brands

NVR SYSTEMS NVR-52 Series, User Manual

Search results

Summary of Contents for NVR-52 Series

Reviews:

Related manuals for NVR-52 Series

Brands by name

Popular brands