NVR SYSTEMS NVR-52 Series User Manual Download Page 94

Page: 94 / 192

6.2.3 Reverse Playback of Multi-channel

Purpose:

You can play back record files of multi-channel reversely. Up to 16-ch (with 1280*720 resolution) simultaneous

reverse playback is supported; up to 4-ch (with 1920*1080P resolution) simultaneous reverse playback is

supported and up to 1-ch (with 2560*1920 resolution) reverse playback is supported.

Enter Playback interface.

Menu>Playback

Check more than one checkboxes to select multiple channels and click to select a date on the calendar.

Figure 6. 23 4-ch Synchronous Playback Interface

Click

to play back the record files reversely.

Summary of Contents for NVR-52 Series

































































































































































































Search results

Summary of Contents for NVR-52 Series

Reviews:

Related manuals for NVR-52 Series

Brands by name

Popular brands

NVR SYSTEMS NVR-52 Series, User Manual

Search results

Summary of Contents for NVR-52 Series

Reviews:

Related manuals for NVR-52 Series

Brands by name

Popular brands