NVR SYSTEMS NVR-52 Series, User Manual

Page: 12 / 192

1.1 Front Panel
Figure 1. 1 NVR-6064
Table 1. 1 Description of Control Panel Buttons
No. Name Function Description
1
Status
Indicators
ALARM Turns red when a sensor alarm is detected.
READY
Ready indicator is normally blue, indicating that the device is
functioning properly.
STATUS
Turns blue when device is controlled by an IR remote.
Turns red when controlled by a keyboard and purple when IR
remote and keyboard is used at the same time.
HDD Blinks red when data is being read from or written to HDD.
MODEM
Reserved for future usage.
TX/RX Blinks blue when network connection is functioning properly.
GUARD
Guard indicator turns blue when the device is in armed status; at
this time, an alarm is enabled when an event is detected.
The indicator turns off when the device is unarmed. The
arm/disarm status can be changed by pressing and holding on the
ESC button for more than 3 seconds in live view mode.
2 IR Receiver Receiver for IR remote
3
Front Panel Lock
(for NVR-6064 series)
You can lock or unlock the panel by the key.
4
DVD-R/W
Slot for DVD-R/W.
5
Alphanumeric Buttons
Switch to the corresponding channel in Live view or PTZ
Control mode.
Input numbers and characters in Edit mode.
Switch between different channels in Playback mode.
The light of the button is blue when the corresponding channel is
recording; it is red when the channel is in network transmission
status; it is pink when the channel is recording and transmitting.