NVR SYSTEMS NVR-52 Series, User Manual

Page: 60 / 192

5.1 Configuring Encoding Parameters
Purpose:
By configuring the encoding parameters you can define the parameters which affect the image quality, such as the
transmission stream type, the resolution and so on.
Before you start:
1. Make sure that the HDD has already been installed. If not, please install a HDD and initialize it.
(Menu>HDD>General)
Figure 5. 1
HDD- General
2. Check the storage mode of the HDD
1) Click Advanced to check the storage mode of the HDD.
2) If the HDD mode is Quota , please set the maximum record capacity and maximum picture
capacity. For detailed information, see Chapter Configuring Quota Mode .
3) If the HDD mode is Group , you should set the HDD group. For detailed information, see
Chapter Configuring HDD Group for Recording and Capture.
Figure 5. 2
HDD- Advanced
Steps :
1. Enter the Record settings interface to configure the encoding parameters:
Menu>Record>Encoding
Figure 5. 3
Record Encoding
2. Encoding Parameters Setting for Recording