Novexx Solutions XLP 504, Service Manual, Page: 142 / 248

Service manual
XLP 504 / XLP 506
05/2018 | 09 142 Parameter Menu
Error reprint
If an error occurs while a label is printed, the last printed label is reprinted. For label layouts conta-
ining variable data (for example, count fields), disable the reprint function.
• On : Reprint in error cases
• Off : No reprint in error cases
Single-job mode
In single job mode (also stop mode) the printer stops after every job and waits until the operator
restarts the print process.
• Off : Single job mode is switched off.
• On : Single job mode is switched on. The printer always displays "Start next job", before starting
a new print job. This requests the user to acknowledge by pressing the Online button.
Temp. reduction
(Reduction in the print head temperature)
Reduces the power supply in the event of an increase in the print head temperature, thereby ensu-
ring an evenly good print image.
The following setting alternatives are available:
• 0%: No temperature reduction.
• xx%: Up to xx% temperature reduction with a hot print head.
Print info mode
Structure option for info printouts.
• Par.values right : Setting for 100 mm material width. The parameter values are printed on the
right side of the parameter names:
Parameter name: Value
• Par.values left : Setting for 100 mm material width. The parameter values are printed on the left
side of the parameter names:
Value: Parameter name
• Compact right : Setting for 50 mm material width. The parameter values are printed on the right
side of the parameter names:
Parameter name: Value
Settings Default setting Step width Easy Plug
On, Off On -- #PC2022
Settings Default setting Step width Easy Plug
Off, On Off -- #PC2023
Setting range Default setting Step width Easy Plug
[0...100]% 20% 5% #PC2026
Settings Default setting Step width Easy Plug
Par.values right, Par.values left,
Compact right, Compact left
Par.values right -- #PC2049