Novexx Solutions XLP 504, Service Manual

Page: 113 / 248

Service manual
XLP 504 / XLP 506
05/2018 | 09 113 Parameter Menu
Punchlevel

Only if
Print > Material > Punchmode
= „Manual“
The value xxx stands for the current contrast within the photoelectric switch of the material which
has just been inserted. This serves to determine a threshold value for the inserted material.
xxx = current measurement at the punch sensor
yyy = set threshold value
Example: Self-adhesive material with black bars lengthways across the label.
Reading:
• Masking paper: 30
• Masking paper + label: 60
• Masking paper + label + black bars: 190
• Recommended setting: 60
A setting value of 60 means that all readings over 60 are ignored, therefore also the reading 190 at
the black bar.
Label sens. type
(Label sensor type)
The optional reflex photoelectric switch for labels with reflecting length markings, or the normal fac-
tory-fitted photoelectric switch for labels with transparent or register gaps (self-adhesive labels),
must be defined according to the application.
• Punched : Transparent photoelectric switch (for gaps)
• Reflex : Reflex photoelectric switch (for black marks on the bottom side)
• Reflex (upper) : n. a.
• Short label opt. : Activates the optional short label sensor

Appears only in XLP 504 printers which are equipped with the short label sensor.

In XLP 50x with activated dispenser, the short label sensor is automatically activated.
Settings Default setting Step width Easy Plug
0...255 -- 1 #PC1023
Punch level
Measured: xxx
AdjLevel: yyy
Settings Default setting Step width Easy Plug
Punched, Reflex, Reflex (upper),
Short label opt.
Punched -- #PC2015, #IM