Novexx Solutions XLP 504, Service Manual

Page: 140 / 248

Service manual
XLP 504 / XLP 506
05/2018 | 09 140 Parameter Menu
Miss. label tol.
(Missing label tolerance)
The maximum search path for gaps which cannot be found can be varied. In cases of difficult gap
detection (i. e. minimum variation in the light transparency, gap to label), shortening the search path
is to be recommended. Label loss resulting from gaps not being detected can be reduced in this
way. Printing does not take place during the search process.
• Example 0 (Zero label length):
A gap must be found after a printed label otherwise an error message is given. This setting is
for detecting every missing label.
• Example 5 (Five label lengths):
A gap must be found after a maximum of 5 label lengths otherwise an error message is given.
Gap detect. mode
After one of the following events, the printer must always search for the punch, that is initialize the
label material:
• Manual : The operator has to initialize the material the first time always manually by pressing
the feed key several times.

After a change of material, the printer has to initialize the rewinder. For this reason, approx.
70 mm label material are fed forward. If the initialization is prevented (e. g. by switching off or
resetting the printer), the following status message will appear after switching on next time:
„5301 BLDC rewinder Ø“.
• Autom. forward : The material initialization is always done automatically, if necessary. There is
no backward movement of the material during the initialization.
Singlestartquant
Determines the label quantity, which will be printed after a start signal.
Reprint function
• Off : Reprinting is not possible.
• On : The last printed label can be reprinted by pressing key 4 in online mode (display „Ready“),
if the printer is not printing at that moment.
Setting range Default setting Step width Easy Plug
[0...50] 2 1 #PC2029
Settings Default setting Step width Easy Plug
Manual, Autom. forward Autom. forward --
Setting range Default setting Step width Easy Plug
[1...10] 1 1 #PC2033
Settings Default setting Step width Easy Plug
Off, On Off -- #PC2050