Novexx Solutions XLP 504, Service Manual

Page: 128 / 248

Service manual
XLP 504 / XLP 506
05/2018 | 09 128 Parameter Menu
Normal 1:1 mode
• The printer cannot print on the whole label surface. A stripe at the label beginning stays unprin-
ted. The width of the unprintable stripe is calculated as follows:
Distance print line to dispensing edge (25 mm) + Dispense position
See also: Parameter Options > Dispenser > Dispenseposition .
• The label is being dispensed while printing.
• The output volume is at its maximum level.
Find an illustration of the sequence in the description of the „Normal 1:1 mode“ for the cut func-
tion (see parameter
Cut mode

on page 124).
[144]The size of the not imprintable area in Normal 1:1 depends of the setting of parameter Options > Dispenser > Dispenseposition
eingestellt ist.
Batch mode
• The printer can print the whole label surface.
• Dispensing of the label takes place during printing. Printing of the next label is interrupted until
the label is completely dispensed.
• The output volume is at its maximum level.

The Batch mode is optimised for printing and dispensing at high speeds. Due to this, it is
not possible to use all features awaliable in modes Normal 1:1 or Real 1:1 . Also consider, that
printing data must be available on time and in sufficient quantity.

Print jobs must not contain the following field types:
– Counter fields
– Variable fields
Find an illustration of the sequence in the description of the „Batch mode“ for the cut function
(see parameter
Cut mode

on page 124).
a
b c
Label
Backing paper
Printing
Printhead
Dispensing
Edge
Feed
Direction
Non-printable area with
Dispense
Dispense
a) Dispense position = 0
b)
position < 0
c) position > 0
Z0137E.ep
s