Novexx Solutions ALS/XLS 204 Service & Installation Manual Download Page 48

Page: 48 / 312

Service Manual

ALS/XLS 20x/256/272

02/2019 | 03

Installation and Deinstallation

Adjusting the Novexx sensor



Press the button [37A] for 2 s, until the status LEDs
[37B] light permanently.

–

Notice

: Don´t press the button for longer than 5 s,

otherwise you risk to switch between NO/NC

, see

chapter

Switching the Novexx sensor - NC/NO



page 49.

– After releasing the button, a teaching „time window“

opens for 2-8 s. During this period, the status LEDs
are flashing fast [38].



While the LEDs are flashing, move as many label
gaps as possible (at least 2) through the sensor fork.

– The movement direction of the label gap is irrele-

vant, that is the same label gap may be moved back
and forth several times.

– The label gaps have to be moved

manually

not

pressing the

button.

– If the label gaps were detected successfully, the sta-

tus LEDs are flashing 2x [39].

– If the label gaps were not detected ideal, the status

LEDs are flashing 4x.



Repeat the procedure, if the label gaps were not de-
tected ideal.

1. NO = Normally open; NC = Normally closed (default setting)

[37] Starting the autoteaching.

[38] Autoteaching is indicated by flashing LEDs.

[39] Sensor is successfully set = flashing 2x.

. 2 s

2-8 s

n. 2x

Summary of Contents for ALS/XLS 204

























































































































































































































































































































Search results

Summary of Contents for ALS/XLS 204

Reviews:

Related manuals for ALS/XLS 204

Brands by name

Popular brands

Novexx Solutions ALS/XLS 204, Service & Installation Manual

Search results

Summary of Contents for ALS/XLS 204

Reviews:

Related manuals for ALS/XLS 204

Brands by name

Popular brands