Novexx Solutions ALS/XLS 204, Service & Installation Manual

Page: 68 / 312

Service Manual
ALS/XLS 20x/256/272
03/2019 | 03 68 Installation and Deinstallation
Mounting a splice table
With the splice table option, the end of the preceding
material roll can be taped to the beginning of the new
roll. Thus, the material doesn´t have to be fed through
the whole machine for each new material roll, what
reduces the downtimes for material change.
Tool:
– 8 mm allen key
Article numbers:
– A107825 Splice table
– 000165-21 Screw M10x16 (4 pieces required)
– 000091-22 Washer 10.5 (4 pieces required)
Mounting (RH machine):
 Screw the splice table [75A] to the flange on top of
the machine using the 4 screws [75B] and washers.
Tightening torque: 45 Nm
[74] Splice table on an ALS 20x.
[75] Mounting the splice table (A).
A
B