Novexx Solutions ALS/XLS 204 Service & Installation Manual Download Page 127

Page: 127 / 312

Service Manual

ALS/XLS 20x/256/272

02/2019 | 00

127

[109] Folders on the USB stick (A).

[110] Files in folder „SupportData“.

If the login was successful, separate folders appear in the FTP client, one for the internal RAM disk
and one for each connected memory medium [108]:

– RAM:

The content of the RAM disk is without matter for the user.

– USB:

If one of the functions for storing setup or diagnosis data on a memory medium was already pro-
cessed, the following subfolders can be found here

1) Depending on the applied memory medium appears SD, CF or USB.

Subfolder

Comment

Formats

Location for setup files (see

MACHINE SETUP > Store Parameters

)

Location for firmware files to be uploaded in standalone mode.

Logfiles

Location for diagnosis files (see

SERVICE/DIAGNOS. > Store diagnosis

)

SupportData

Location for setup and diagnosis files (see

SERVICE/DIAGNOS. > Gen.Support Data

)

Fonts

Without function

Graphics

Logos

Summary of Contents for ALS/XLS 204

























































































































































































































































































































Search results

Summary of Contents for ALS/XLS 204

Reviews:

Related manuals for ALS/XLS 204

Brands by name

Popular brands

Novexx Solutions ALS/XLS 204, Service & Installation Manual

Search results

Summary of Contents for ALS/XLS 204

Reviews:

Related manuals for ALS/XLS 204

Brands by name

Popular brands