Novexx Solutions ALS/XLS 204, Service & Installation Manual

Page: 86 / 312

Service Manual
ALS/XLS 20x/256/272
02/2019 | 02 86
Labelsen. InType function
– Input type of the alternative label sensor ( not valid for the standard (Wenglor) photoelectric label
sensor)
– Settings: [ NPN , PNP]
Startsen. In.Type function
– Product sensor input type
– Settings: [
NPN , PNP]
Start disp. mode function
– Defines either the rising or falling side of the start signal peak as the point when dispensing is
triggered.
– Settings: [„ Pulse falling “, „Level low active“, „Pulse rising“, „Level high activ“, „Pulse fall/ris”]
“Pulse falling”: Dispensing a label is triggered by a change from high to low at the "sensor signal”
input.
“Level low active”: Setting is only visible in production mode. Labels are dispensed for as long
as the signal at the “sensor signal” input remains at the value low.
“Pulse rising”: Dispensing a label is triggered by a change from low to high at the "sensor signal”
input.
“Level high activ”: Setting is only visible in production mode. Labels are dispensed for as long
as the signal at the “sensor signal” input remains at the value high.
“Pulse fall/ris”: Dispensing a label is triggered both by a change from low to high and by a
change from high to low at the "sensor signal” input.
Start error stop function
– Refers to the standard procuct start input (M12 connector), see chap. Photoelectric product sen-
sor

on page 59.
– Determines how the machine reacts to a product start error. A product start error occurs when-
ever a further start signal is received before the current dispensing process is finished ( LABEL
SETUP > Product length = 0) respectively before the product with the set length has „passed by“
( LABEL SETUP > Product length > 0).
– Settings: [ On , Off, „Off label queued“]
On: A start error is followed by the error message:
The machine stops.
Off:
A start error is followed by the warning:
The machine continues labelling. The warning can be set back by Easy-Plug command #!CL-
RW.
„Off label queued“: Too early start signals are queued. They are processed, as soon as the ma-
chine is idle again.
Status num:5009
Start error
ONLINE
Productstartwarn