Novell ZENWORKS PATCH MANAGEMENT 6.4 SP2 - SERVER, User Manual

Page: 111 / 390

W
ORKING
W
ITH
D
EPLOYMENTS
- 95 -
Table 4-14: Deployment Options Fields
Click Next to proceed to the Package Deployment Order and Behavior page.
Field Description
Job Name The display name of the deployment job. (Note: This field must not be
blank.)
Task Name The editable display name of the deployment task. The {Package Name}
variable will be replaced with the name of the Package included in the
task.
Start Time Displays the Local and UTC times the deployment is scheduled for.Click
Change to open the Schedule Configuration page and modify time
options.
Deployment Time Zone
• Agent Local Time - Select to deploy based upon the local time of each
device.
• Agent UTC Time - Select to deploy based upon UTC (Coordinated
Universal Time). When UTC is used, the deployment will be scheduled
for all devices at the same time, regardless of time zone differences.
Manner
• Concurrent - Simultaneous distribution to a specified number of
devices. New deployments are distributed as agents report back as
having completed the previous deployment. If a computer takes longer
than four hours to complete the deployment, it is no longer counted
against the Concurrent Deployment Limit.
• Consecutive - Creates and distributes all deployments
simultaneously.The global deployment limit will always take precedence
over the defined distribution options defined.
• Suspend the deployment of this package, if it fails to deploy to one
or more devices
- Suspends all subsequent deployments following any
deployment failure.
• Deploy package even if the device has been previously patched -
deploys the package to all selected computers regardless of patch
status.
Notes Allows for notes or comments.