Nortel TDM Recorder, Installation Manual

Page: 99 / 128

September 2007 Voice Card Configurations
Installation Guide 99
E1/T1 card properties
The following information appears on the Cards page when you select
General Setup > Voice > Cards in the Recorder Manager with an E1 or T1
voice card. Refer to Compatible voice cards on page 98 for model numbers.
Field Description
PCI Bus
Number Bus Number. Read-only
PCI Slot
Number Slot Number. Read-only
Card Type Model Number. (DP3209, DP6409). Read-only
Serial # Alphanumeric character. Ready-only
Card
Status Voice card status (Newly Added, Replaced, Removed,
Existing). Ready-only
Mode Defines whether the card is operating with the E1 or T1
firmware on it. Predefined options are E1 or T1 (T1 is the
default). This field is editable and required.
Audio
Recorded
Format Defines the method for encoding the audio data in a WAV file.
Predefined options are Alaw, uLaw, G726 (default), and
G729A. This field is editable and required
VOX Run
On Defines the length of time sound needs to be below the
threshold before the VOX method determines a call has ended.
Threshold is configurable on each channel. This field is
editable and required
VOX Turn
On Defines the length of time sound needs to be above the
threshold before the VOX method identifies a call. Threshold
is configurable on each channel. This field is editable and
required