Recorder Software Installation
Standard 3.0
52
Nortel TDM Recorder
9
Choose
Typical
, and either accept the suggested destination folder and
click
Next
, or click
Browse
and enter the correct destination folder. Click
Next
. The Call Buffer window displays:
This is the location where the TDM Recorder will store calls, so you must
ensure that the location has enough space to store the calls. If the
displayed destination folder is correct click Next, or click Browse to enter
another destination folder.
Note:
The installation program does not create the destination folder.
You must create it first before you can specify it.
Note:
The /Calls folder must be set up as a shared folder.
Note:
Although a different disk drive with 6 GB of free space is
recommended, the performance of your system will be greatly enhanced
if you have a large Call Buffer. Nortel recommends a minimum buffer
size of 6 GB.
Summary of Contents for TDM Recorder
