Nortel TDM Recorder, Installation Manual

Page: 104 / 128

Voice Card Configurations Standard 3.0
104 Nortel TDM Recorder
E1/T1 channel hardware configurations
The following information appears on the Cards page when you select General
Setup > Voice > Channels in the Recorder Manager with an E1 or T1 voice card.
Field Description
Checkbox Field that will determine whether a channel has been
selected for use. Selecting the checkbox will subtract a
license channel from the “Available License” counter and
vice versa when a channel is unchecked.
NOTE : The default
value for checkboxes for cards with a status of Newly
Added is unchecked (disabled) regardless of whether the
channel is licensed
Channel
Number Number of the channel on the card, such as 1, 2, or 3. Read-
only field
Channel ID Logical channel ID is a unique number that is used in the
Unify mapping table to identify Channel. Read-only field.
VOX Detect
Level Defines the threshold used for VOX-based call detection.
Units are in decibels with default 0. Required field.
CCE Control Command Control Engine. Options are Yes and No . Yes is
the default. Required field.
The Nortel Contact Recording master recorder is an
example of a Cammand Control Engine. It controls when the
TDM Recorder records and tags calls by sending messages
to the TDM Recorder’s capture component. In this type of
recording configuration, the setting should be Yes.