Nortel Passport 15000, Hardware Installation And Maintenance, Page: 671 / 874

Chapter 17 Hardware procedures 671
Passport 15000, 20000 Hardware Installation, Maintenance, and Upgrade 5.2S2
4 While the CP is unseated, carefully unplug the cable connectors on the
faceplate of the CP, and let them hang aside. Avoid touching any part of
the card behind the faceplate.
5 On the faceplate of the card, fully swing out the upper and lower latches
until they stop. See the figure “Fully opened card latches” (page 754).
6 Place fingers on the exposed tabs to gently but firmly slide the CP out of
its slot. Hold only the edges of the CP. Be careful because a CP weighs
about 5 kg (11 lbs).
7 Put the CP aside onto its original packaging. Packing it after the
replacement CP is installed minimizes the amount of time the CP is out of
service.