Nortel Passport 15000, Hardware Installation And Maintenance, Page: 20 / 874

20 Contents
241-1501-240 5.2S2
Figure 85 Connection points of the cables for an alarm/BITS
module in a Passport 15000 318
Figure 86 Connection points of the cables for an alarm/BITS
module in a Passport 20000 319
Figure 87 Types of connectors on Passport FP cables 323
Figure 88 The transmit and receive orientation on a 16-port OC-3/
STM-1 FP (NTHW21) 326
Figure 89 The transmit and receive orientation on a 16-port OC-3/
STM-1 FP (NTHW31) 327
Figure 90 The transmit and receive orientation on a 16-port OC-3/
STM-1 POS and ATM FP (NTHW44) 328
Figure 91 Power input cable connected to the BIP stud labelled
B1+ 336
Figure 92 Overhead power input cables for the lower shelf
connected to the BIP 337
Figure 93 Insulating boots and clamps at the rear of the BIP 338
Figure 94 Power cable connections at the rear of an MFA150
system of ac rectifiers 342
Figure 95 Power cable connections at the breakers inside an
MFA150 controller, side view 343
Figure 96 Power cable connections at the ground busbar inside an
MFA150 controller 344
Figure 97 Overhead power input cables for the lower shelf
connected to the BIP 348
Figure 98 Insulating boots and clamps at the rear of the BIP 349
Figure 99 Power input cables connected to a polyvalent power-
and-ground assembly A0834143 350
Figure 100 The ETSI power-and-ground assembly A0834149 351
Figure 101 BIMs for specific shelf nodes 352
Figure 102 Cable connections at the rear of a BIP 358
Figure 103 Frame-to-frame joining brackets in kit numbers
NTRU0365 and NTHR0370 361
Figure 104 Passport 7480 shelf assembly grounding stud 363
Figure 105 Location of the grounding strip at the top of NEBS 2000
frame 364
Figure 106 Shasta 5000 shelf assembly grounding studs 366
Figure 107 Location of the grounding strip at the top of NEBS 2000
frame 367
Figure 108 Top grounding for CBN, side view 370
Figure 109 Top grounding for IBN, side view 371
Figure 110 Physical characteristics of a BIM in a BIP 377