Nortel CTI ToolKit, User Manual, Page: 24 / 108

PeriProducer CTI Toolkit User’s Guide for M1
Page 24 Nortel Networks Confidential # P0606089 Ver: 1.1
The monitor will show several screens of output. Wait for the command
prompt to return.
7. Enter
pkgadd -d
.
PERIctitk
to install the CTI Toolkit. The monitor
will show several screens of output.
8. The following confirmation message will appear:
Do you want to continue with the installation of
<PERIctitk> [y,n,?] y
Enter
Y
9. After the package is installed, the following message appears:
Installation of
<
PERIctitk
>
was successful
.
10. Reboot the machine.
11. Enter the following command to ensure the CTI Toolkit exists on the
system:
pkginfo
|
grep PERIctitk
The following message should appear:
application PERIctitk CallSPONSOR CTI PERIPRO TOOLS
Removal of the CTI Toolkit on Solaris
Perform the following steps to uninstall the CTI Toolkit from a Solaris system.
1. Enter the following command to remove the CTI Toolkit from the system:
pkgrm PERIctitk
2. One or more confirmation messages such as the following will appear:
Do you want to remove this package? y
Enter Y to all confirmation prompts.
3. The following message should appear:
Removal of
<
PERIctitk
>
was successful
.