Nortel Call Center Telephone Administration Manual Download Page 91

Page: 91 / 191

Chapter 7 Off-premise Message Notification

Call Center Telephone Administration Guide

To change the destination from telephone to another destination

Press

≤

·°⁄

Follow the voice prompts or the display button options to open the
skillset mailbox.

If you use the CallPilot interface:

•

Press

°ﬁ

to open the Mailbox Tools

•

Press

NOTIF

to open the Off-premise Message

Notification menu

•

Go to step 3

If you use the Norstar Voice Mail interface:

•

Press

ADMIN

•

Press

ﬂ

to open the Off-premise Message Notification

•

Go to step 3

Press

ADMIN

⁄

to set up Off-premise Message Notification.

Press

CHNG

⁄

to change the destination.

Press

PHONE

⁄

to choose another telephone number

destination
or
press

EXT

to choose an extension destination

or
press

PAGER

‹

to choose a pager number destination.

Enter the destination number and press

The destination telephone number cannot be longer than 30 digits.

Press

to accept the destination number

or
press

RETRY

•

to re-enter the destination number.

Press

to continue

or
press

CHNG

⁄

to change the destination, and repeat steps 6

through 8.

Msg notify

ADMIN SELECT

Notify: phone

CHNG NEXT

Destination:

PHONE EXT PAGER

<x>

RETRY OK

Accept:<xxxx>

RETRY OK

Notify:<x>

CHNG NEXT

Summary of Contents for Call Center Telephone
































































































































































































Search results

Summary of Contents for Call Center Telephone

Reviews:

Related manuals for Call Center Telephone

Brands by name

Popular brands

Nortel Call Center Telephone, Administration Manual

Search results

Summary of Contents for Call Center Telephone

Reviews:

Related manuals for Call Center Telephone

Brands by name

Popular brands