Nortel 4050, User Manual

Page: 879 / 922

Appendix C Supported MIBs 879
Nortel Secure Network Access Switch 4050 User Guide
Supported traps
Table 206 describes the traps supported by the Nortel SNAS 4050.
Table 206
Supported traps
Trap Name Description
authenticationFailure Sent when the SNMP agent receives an SNMP message which is not
properly authenticated. This trap is disabled by default. To enable the
trap through SNMP, set
snmpEnableAuthenTraps
to enabled or
use the CLI command
/cfg/sys/adm/snmp/snmpv2-mib/
snmpenable
.
Defined in SNMPv2-MIB.
coldStart Sent when the Nortel SNAS 4050 reboots.
Defined in SNMPv2-MIB.
isdAlarmCleared Sent when an alarm is cleared.
isdDown Signifies that a Nortel SNAS 4050 device in the cluster is down and
out of service.
isdLicense Sent when the Nortel SNAS 4050 devices in the cluster have different
licenses and when a demo license has seven days left before
expiration.
Defined in ALTEON-ISD-PLATFORM-MIB.
isdLicenseExpired Sent when a license has expired.
isdMipMigration Signals that the master IP has migrated to another Nortel
SNAS 4050.
isdSingleMaster Signifies that only one master Nortel SNAS 4050 in the cluster is up
and operational. Only having one master in a cluster means that the
fault tolerance level is severely degraded — if the last master fails, the
system cannot be reconfigured.
linkDown Sent when the agent detects that one of the links (interfaces) has
gone down.
Defined in IF-MIB.
linkUp Sent when the agent detects that one of the links (interfaces) has
gone up.
Defined in IF-MIB.