Nortel 4050, User Manual

Page: 855 / 922

Appendix B Syslog messages 855
Nortel Secure Network Access Switch 4050 User Guide
Table 193 lists the System Control Process ALARM messages. To simplify
finding the alarm messages, the
name
parameter is listed first.
Table 193
System Control Process messages — ALARM
Message Category Explanation/Action
Name: isd_down
Sender: <IP>
Cause: down
Extra:
Severity: critical ALARM A member of the Nortel SNAS 4050 cluster is
down. This alarm is only sent if the cluster
contains more than one Nortel SNAS 4050.
Name: single_master
Sender: system
Cause: down
Extra:
Severity: warning ALARM Only one master Nortel SNAS 4050 in the
cluster is up and running.
Name: log_open_failed
Sender: <IP>, event
Cause and Extra are explanations of the
fault.
Severity: major ALARM The event log (where all events and alarms
are stored) could not be opened.
Name:
make_software_release_permanent_failed
Sender: <IP>
Cause: file_error | not_installed
Extra: “Detailed info”
Severity: critical ALARM Failed to make a new software release
permanent after being activated. The system
automatically reverts to the previous version.
Name: copy_software_release_failed
Sender: <IP>
Cause: copy_failed | bad_release_package |
no_release_package | unpack_failed
Extra: “Detailed info”
Severity: critical ALARM A Nortel SNAS 4050 failed to install a
software release while trying to install the
same version as all other Nortel SNAS 4050
devices in the cluster. The failing Nortel
SNAS 4050 tries to catch up with the other
cluster members, because it was not up and
running when the new software version was
installed.
Name: license
Sender: license_server
Cause: license_not_loaded
Extra: “All iSDs do not have the same license
loaded”
Severity: warning ALARM All Nortel SNAS 4050 devices in the cluster
do not have a license containing the same set
of licensed features. Check loaded licenses
using the
/cfg/sys/cur command.
Name: license
Sender: <IP>
Cause: license_expire_soon
Extra: “Expires: <TIME>”
Severity: warning ALARM The (demo) license loaded to the local Nortel
SNAS 4050 expires within 7 days. Check
loaded licenses using the /cfg/sys/cur
command.