Nortel 4050, User Manual

Page: 259 / 922

Chapter 6 Configuring authentication 259
Nortel Secure Network Access Switch 4050 User Guide
add < variable name >
< LDAP attribute >
[< prefix >] [< suffix >]
Adds an LDAP macro to the configuration. You are
prompted to enter the following information:
• variable name — the name of the variable.
• LDAP attribute — the LDAP user attribute
whose value will be retrieved from the client’s
LDAP/Active Directory user record.
• prefix — if the value string of the LDAP attribute
is long and you wish to extract only part of it, the
values at the start of the string that you want to
ignore. Combine with a suffix if the value you want
is in the middle of the string.
• suffix — if the value string of the LDAP attribute
is long and you wish to extract only part of it, the
values at the end of the string that you want to
ignore. Combine with a prefix if the value you want
is in the middle of the string.
The system automatically assigns the next available
index number to the macro.
insert < index number >
< variable name >
Inserts a macro at a particular position in the list of
LDAP macros in the configuration.
•
index number
— the index number you want
the macro to have
• variable name — the LDAP macro you are
adding
The index number you specify must be in use. The
index numbers of existing macros with this index
number and higher are incremented by 1.
move < index number >
< new index number >
Moves a macro up or down the list of macros in the
configuration.
•
index number
— the original index number of
the macro you want to move
• new index number — the index number
representing the new position of the macro in the
list
The index numbers of the remaining entries adjust
accordingly.
/cfg/domain 1/aaa/auth #/ldap/ldapmacro
followed by: