manualshive.com logo in svg

Nortel 4050, User Manual

The Samsung 4050 comes with a comprehensive Quick Start Manual that serves as a handy guide for all its features and functionality. This manual is available for free download on manualshive.com to ensure an effortless setup and smooth user experience, providing step-by-step instructions for your convenience.

Share
Download
background image

650

Chapter 12 Configuring SNMP

320818-A

 

Depending on the type of monitor selected, the fields displayed on the 
Configuration tab will change. For descriptions of the displayed fields, refer to the 
appropriate section:

•

“Boolean monitors” on page 650

•

“Threshold monitors” on page 652

•

“Existence monitors” on page 654

Removing monitor events

To delete a monitor event, perform the following steps:

1

Select the 

System > Administrative > SNMP > Event > Monitor Table

 tab.

The Monitor Table appears (see 

Figure 188

).

2

Select the monitor event to be removed from the 

Monitor Table

.

3

Click 

Delete

.

A confirmation dialog box appears.

4

Click 

Yes

.

5

Click 

Apply

 on the toolbar to send the current changes to the Nortel 

SNAS 4050. Click 

Commit

 on the toolbar to save the changes permanently.

Boolean monitors

Boolean monitors check the value of a monitored OID against a specific value, 
and trigger an event if the result matches the desired operation.

Summary of Contents for 4050



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 4050

Panasonic KX-UDS124 Maintenance Tool Manual preview
KX-UDS124
Brand: Panasonic Pages: 24
Panasonic i-Pro WV-SP302 Speci?Cations preview
i-Pro WV-SP302
Brand: Panasonic Pages: 2
Panasonic BB-HCM381A - Network Camera Troubleshooting Manual preview
BB-HCM381A - Network Camera
Brand: Panasonic Pages: 28
Panasonic BB-HCM381A - Network Camera Installation Manual preview
BB-HCM381A - Network Camera
Brand: Panasonic Pages: 2
LaCie d2 Network 2 Quick Install Manual preview
d2 Network 2
Brand: LaCie Pages: 44
LaCie LaCie Ethernet Disk Datasheet preview
LaCie Ethernet Disk
Brand: LaCie Pages: 2
LaCie 5big - Network NAS Server Quick Start Manual preview
5big - Network NAS Server
Brand: LaCie Pages: 9
LaCie 2big NAS Quick Install Manual preview
2big NAS
Brand: LaCie Pages: 14
LaCie 12big Rack Fibre 8 Quick Install Manual preview
12big Rack Fibre 8
Brand: LaCie Pages: 9
Pakedge Device & Software X-Series Quick Start Manual preview
X-Series
Brand: Pakedge Device & Software Pages: 20
Paradyne 3172 Quick Reference preview
3172
Brand: Paradyne Pages: 20
Paradyne Compshere 3000 Series Notice preview
Compshere 3000 Series
Brand: Paradyne Pages: 2
Pantech Sprint PX-500 Quick Start Manual preview
Sprint PX-500
Brand: Pantech Pages: 17
TP-Link TD-8817 Specifications preview
TD-8817
Brand: TP-Link Pages: 3
NETGEAR AC1450 Installation Manual preview
AC1450
Brand: NETGEAR Pages: 14
Allnet ALL1682504 Quick Installation preview
ALL1682504
Brand: Allnet Pages: 12
Telebyte 458-LM-E2-36 Quick Start Manual preview
458-LM-E2-36
Brand: Telebyte Pages: 19
Moxa Technologies PT-7324 Series User Manual preview
PT-7324 Series
Brand: Moxa Technologies Pages: 36

Brands by name

Popular brands

Load more brands