Nortel 4050 User Manual Download

Page: 424 / 922

424

Chapter 9 Customizing the portal and user logon

320818-A

Enter the Language information in the applicable fields.

Table 80

describes

the Import Definition fields.

Click

Apply

on the toolbar to send the current changes to the Nortel

SNAS 4050. Click

Commit

on the toolbar to save the changes permanently.

Table 80

Import/Export Definition fields

Field

Description

Action

Specifies whether you are importing or exporting the
language definition file.

Protocol

Specifies the protocol used to import or export. Options
are:

•

tftp

•

ftp

•

scp

•

sftp

Host

Specifies the host name or IP address of the server.

Filename

Specifies the name of the language definition file.

ISO 639 Code

Specifies the ISO 639 language code.

Username

Specifies the FTP username.

Password

Specifies the FTP password.

Note:

When exporting, the language definition is exported immediately

after the

Apply

button is clicked.

Summary of Contents for 4050



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 4050

Reviews:

Related manuals for 4050

Brands by name

Popular brands

Nortel 4050, User Manual

Search results

Summary of Contents for 4050

Reviews:

Related manuals for 4050

Brands by name

Popular brands