Nortel 4050, User Manual

Page: 414 / 922

414 Chapter 9 Customizing the portal and user logon
320818-A
Configuring links using the CLI
To create and configure the links included in the linkset, use the following
command:
/cfg/domain 1/linkset < linkset ID >/link < index >
where
index
is an integer in the range 1 to 256 that indicates the position of the
link in the linkset.
When you first create the link, if you do not specify the index in the command,
you will be prompted to enter the index or name. You must enter the index for the
new link. You will then be prompted to enter the following parameters:
• link text — a string that displays on the portal Home tab as the clickable link
text. You can later modify the text by using the
text
command on the Link
menu.
• type — the link type (
external
or
ftp
). The default is
external
. After you
enter the link type, you automatically enter a wizard to configure type-specific
settings for the link. You can later relaunch the wizard to modify the settings.
For more information about the settings, see
“Configuring external link
settings using the CLI” on page 415 or “Configuring FTP link settings using
the CLI” on page 415 .
The Link menu displays.