Nortel 4050 User Manual Download

Page: 684 / 922

684

Chapter 13 Viewing system information and performance statistics

320818-A

Table 148

describes the

Per Domain Licenses

fields.

Viewing session details using the SREM

You can view information about active sessions for all clients, or for an individual
or group of clients.

To view information about active sessions, select one of the following tasks:

•

“Viewing active sessions using the SREM” on page 685

•

“Viewing details for a particular session” on page 687

•

“Ending active user sessions” on page 688

•

“Viewing the number of active sessions using the SREM” on page 690

Table 148

Per Domain Licenses fields

Field

Description

Auto Refresh

Specifies whether the information displayed is
automatically refreshed.

Interval

Specifies the interval in seconds before the screen is
automatically refreshed. Only applicable if

Auto

Refresh

is selected.

Logging

Specifies whether a log file is automatically created for
the per domain licenses.

If selected, you can click

Browse

to specify the log file

name and location.

State of Licenses Per Domain

Displays information about current license usage in the
domain, by license type. For the Nortel SNAS 4050,
SSL is the only type of license.

Summary of Contents for 4050



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 4050

Reviews:

Related manuals for 4050

Brands by name

Popular brands

Nortel 4050, User Manual

Search results

Summary of Contents for 4050

Reviews:

Related manuals for 4050

Brands by name

Popular brands